Pressing Instructions

DTF & UV-DTF Pressing Instructions

How to Apply DTF Transfers for Professional Results

Following the correct pressing instructions is essential for achieving vibrant colors, strong adhesion, and long-lasting durability. Whether you're a business owner, print shop, apparel brand, or first-time customer, these guidelines will help you get the best results from your DTF Transfers.

If you have any questions, our team is always here to help.


DTF Transfer Pressing Instructions

Recommended Heat Press Settings

Setting Recommendation
Temperature 300°F – 320°F
Pressure Medium to Firm Pressure
Press Time 10–15 Seconds
Peel Method Cold Peel

Always test your equipment before large production runs. Heat presses may vary.


Step 1: Prepare Your Garment

Before pressing:

✔ Ensure the garment is clean and dry

✔ Remove moisture by pre-pressing for 3–5 seconds

✔ Smooth wrinkles and folds

✔ Position garment correctly on the heat press

Proper preparation helps improve adhesion and print quality.


Step 2: Position Your Transfer

Place the DTF Transfer on the garment exactly where you want it printed.

Before pressing:

✔ Check alignment

✔ Verify placement

✔ Ensure transfer is flat

✔ Remove any lint or debris

Taking a few extra seconds can prevent costly mistakes.


Step 3: First Press

Press using:

Recommended Settings

Temperature: 300°F–320°F

Time: 10–15 Seconds

Pressure: Medium to Firm

Apply consistent pressure across the entire design.


Step 4: Cold Peel

Allow the transfer to cool completely.

Once cool:

✔ Slowly peel the film

✔ Peel evenly from one corner

✔ Verify full adhesion

Do not peel while hot unless specifically instructed for your transfer type.


Step 5: Final Press

For maximum durability and a softer feel:

Place:

✔ Parchment Paper

OR

✔ Teflon Sheet

Over the transfer.

Press again for:

5–10 Seconds

This final press helps:

✔ Improve wash durability

✔ Enhance adhesion

✔ Create a softer finish

✔ Improve overall appearance


Recommended Garments

DTF Transfers work well on:

✔ Cotton

✔ Polyester

✔ Cotton/Poly Blends

✔ Performance Fabrics

✔ Hoodies

✔ Sweatshirts

✔ T-Shirts

✔ Tote Bags

✔ Workwear


Washing Instructions

To maximize transfer life:

Recommended

✔ Wait 24 hours before washing

✔ Wash inside out

✔ Use cold water

✔ Use mild detergent

✔ Tumble dry low

Avoid

❌ Bleach

❌ High heat drying

❌ Dry cleaning

❌ Direct ironing on transfer

Proper care helps preserve color vibrancy and durability.


UV-DTF Application Instructions

How to Apply UV-DTF Transfers

Unlike traditional DTF transfers, UV-DTF Transfers do not require a heat press.

UV-DTF decals are applied directly to hard surfaces.

Perfect for:

✔ Tumblers

✔ Cups

✔ Glass

✔ Plastic

✔ Acrylic

✔ Metal

✔ Promotional Products


Step 1: Clean the Surface

Before application:

✔ Remove dust

✔ Remove oils

✔ Remove fingerprints

✔ Ensure the surface is completely dry

A clean surface is essential for proper adhesion.


Step 2: Position the Design

Carefully position the transfer where desired.

Before applying:

✔ Check alignment

✔ Verify spacing

✔ Ensure correct placement

UV-DTF transfers are difficult to reposition once applied.


Step 3: Apply the Transfer

Firmly press the transfer onto the surface.

Use:

✔ Fingers

OR

✔ Squeegee Tool

Apply pressure evenly across the entire design.


Step 4: Remove Carrier Sheet

Slowly peel away the carrier film.

If any portion remains lifted:

✔ Reapply pressure

✔ Rub firmly

✔ Continue peeling slowly

Take your time for the best results.


UV-DTF Care Instructions

For best durability:

✔ Hand washing recommended

✔ Avoid abrasive scrubbing

✔ Avoid extreme heat exposure

✔ Allow adhesive to cure for 24 hours before heavy use


Common Pressing Mistakes to Avoid

❌ Incorrect temperature

❌ Too little pressure

❌ Uneven pressure

❌ Peeling before cooling

❌ Pressing over wrinkles

❌ Applying transfers to dirty surfaces

❌ Washing garments too soon

Avoiding these mistakes helps ensure professional-quality results every time.


Need Help?

If you're having trouble applying your transfers, our team is happy to assist.

📞 (305) 801-8267

📧 sales@transfer305.com

📧 files@transfer305.com

📍 10775 SW 190th St Unit 7, Miami, FL 33157


Print With Confidence

Transfer305 proudly provides Same-Day DTF Transfers, UV-DTF Transfers, Custom Gang Sheets, and Transfers By Size with professional quality, fast turnaround times, and exceptional customer support.

Follow these instructions for the best results and enjoy long-lasting, vibrant transfers every time.